1) Straight through globe valve
2) Straight flow globe valve: in straight flow or Y-shaped globe valve, the flow channel of the valve body and the mainstream channel into a diagonal line, so that the damage of the flow state is smaller than the conventional globe valve, and the pressure loss through the valve is also smaller.
3) Angle globe valve: in the Angle globe valve, the fluid only needs to change the direction once, so that the pressure drop through the valve is smaller than that of the conventional structure of the globe valve.
4) plunger globe valve: this form of globe valve is a variation of the conventional globe valve. In this valve, the disc and seat are usually designed based on the plunger principle. The disc polished plunger is connected with the valve stem, and the sealing is achieved by two elastomeric sealing rings sheathed on the plunger. The two elastomeric rings are separated by a sleeve ring and the rings around the plunger are held tight by a load applied to the bonnet by the bonnet nut. The elastomeric seal is replaceable and can be made of a variety of materials. The valve is designed primarily for "on" or "off", but with a special form of plunger or special ring, it is also available for flow control.