-
Description & Features Pneumatic Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design
Add to Inquiry
-
Stainless Steel Swing Check Valve is used to prevent back flow in the line. Flow is in a straight line through the valve resulting in minimal pressure drop. The disc swings into the open position as
Add to Inquiry
-
Pressure Seal Check Valves are ideal for high pressure steam, liquid, catalytic reformers, hydro crackers and other tough services. In the tough world of High pressure, High temperature valve
Add to Inquiry
-
Tilting Disc Check Valve on the pipeline media itself the flow generated by a force which open and close automatically, belonging to an automatic valve, check valve for pipeline system, its main
Add to Inquiry
-
The butterfly check valves are a compact kind of check valve. With a small face to face length and being wafer type, these dual plate check valves can be mounted directly between flanges and in
Add to Inquiry
-
DIN lift Check Valves are the valves of stopping the fluid from backflow. The disc can be opened by the pressure of fluid. And then the fluid runs from the inlet to the outlet side. When the pressure
Add to Inquiry
-
With a piston for the disc, the seat design of piston check valve is similar to a globe valve. It has a dashpot made of a cylinder and piston that acts as protection during application.
Add to Inquiry
-
Forged Steel Check Valve usually works automatically. Under the action of the fluid pressure flowing in one direction, the valve flap opens; when the fluid flows in the opposite direction, the fluid
Add to Inquiry
-
Piston Type Check Valve is a device widely used in petrochemical, thermal power plants and other water, oil, steam pipelines for connecting or cutting off the medium in the pipeline opening and
Add to Inquiry
-
The dual plate wafer check valves has two spring loaded half-moon shaped discs that rotate about their shaft. The disc plates are kept shut by the torsion spring. When fluid flows in the forwards
Add to Inquiry
-
Lug Type Check Valve is used in pipeline system, its main function is to prevent medium backflow, pump and its drive motor reverse, as well as the discharge of medium in the container. According to
Add to Inquiry
-
Wafer Type Swing Check valves is usually installed in pipeline system, prevent medium from flowing back, check valve is automatic valve that it is opened and closed by pressure of fluid.
Add to Inquiry
