-
Bellows seal gate valve is generally used gate valve type to protection for pumps or similar equipment, allowing the flow only in one direction and preventing flow reversal due to back pressure. This
Add to Inquiry
-
Pneumatic Slide Gate Valve are available in various designs, one-piece body and two-piece bodies, rising stem and non-rising stem, uni-direction and bi-direction structures, resilient and metal seat
Add to Inquiry
-
Manual slide gate valve is also called manual knife gate valve, it is a valve which the gate plate is always in close contact with the valve seat. The principle is to open a square or round hole on
Add to Inquiry
-
Parallel Slide Gate Valve is suitable for the closed circuit equipment on the pipeline with water and sewage as medium. It is not allowed to be used for regulating flow and emptying. Widely used in
Add to Inquiry
-
The opening and closing part of the knife gate valve is the knife. The movement direction of the knife is perpendicular to the fluid direction. The medium is cut off by the blade shaped knife which
Add to Inquiry
-
Cast Steel Globe Valve also called cut-off valve, is one of the most widely used valves. Due to the low friction between the sealing surfaces during the opening and closing process, it is relatively
Add to Inquiry
-
Bonney Forged steel globe valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket
Add to Inquiry
-
Y Pattern globe valve with its stem and passageway forming a certain angle, and its seat sealing face and inlet and outlet passageways forming a certain angle. It is divided into left and right parts
Add to Inquiry
-
The globe valve is built to handle low temperatures and cryogenic conditions. It is made from robust materials, such as stainless steel, carbon steel, cast steel, and more. It is equipped with an
Add to Inquiry
-
Ductile Iron Globe Valve is is a forced sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. It has a regenerable valve seat and
Add to Inquiry
-
DIN globe valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Globe valves
Add to Inquiry
-
Angle type Globe Valves are designed and manufactured according to Standards BS1873, ASME B16.34 or DIN3202, and special customers’ requirements.designed with a 90 degree between inlet and outlet to
Add to Inquiry
