-
Float Steam Trap is a mechanical trap operating on the difference of density between steam and water. The mechanical principle of Ball Float Steam Trap is composed of an integral stainless steel
Add to Inquiry
-
Bimetallic Steam Trap can conserve energy by discharging sub-cooled condensate in those applications which can utilise sensible heat. They are the most robust of all the thermostatic steam traps,
Add to Inquiry
-
Sleeve Plug Valve are non-lubricated quarter-turn valves that achieve sealing through the use of a compressible sleeve as a sealing member. In many applications they operate virtually maintenance
Add to Inquiry
-
Pressure Balance Lubricated Plug Valve is a fast-switching straight-through valve, which can be opened or closed by rotating the channel port on the valve plug and the channel port on the valve body
Add to Inquiry
-
Twin Seal Orbit Plug Valve, which is different from traditional has better pun is broken and discharge function, can realize pipeline shut off completely, the main characteristics of the structure is
Add to Inquiry
-
Ductile iron foot valve is a special type of check valve that has a built-in strainer. It is installed at the intake side of a suction pipe and pump, its purpose is to prevent the loss of prime when
Add to Inquiry
-
Stainless Steel Foot Valve is a kind of energy-saving valve, which is generally installed at the bottom end of the underwater suction pipe of the water pump to restrict the liquid in the water pump
Add to Inquiry
-
High Pressure Needle Valve is a precise adjustment of the valve, the use of a wide range, such as flame cutting with cutting distance, adjust the flame temperature knob is a needle valve.
Add to Inquiry
-
Needle Valve uses a tapered pin to gradually open a space for fine control of flow. The flow can be controlled and regulated with the use of a spindle. A needle valve has a relatively small orifice
Add to Inquiry
-
The weir type diaphragm valve has its two ports in line with each other on the opposite sides of the valve, whereas the weir type has the in/out ports located at a 90 degree angle from one another.
Add to Inquiry
-
Rubber Lined Diaphragm Valve is a special form of shut-off valve. Its opening and closing part is a diaphragm made of soft material, and the valve body cavity and bonnet cavity are separated from the
Add to Inquiry
-
Fluorine Lined Diaphragm Valve is a kind of special form, which has the function of truncation valve, the opening and closing by steel disc and rubber diaphragm and the valve body cavity with the
Add to Inquiry
First 45678910 Last 10/10
