-
Pneumatic Angle Seat Valve
Description & Features Pneumatic Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design Add to Inquiry -
Bellow Seal Globe Valve
Bellows Seal Globe Valve is a new kind of globe valves with dual-seal. So its sealing is very good. The sealing surface is bead welding with hard alloy and the stem surface is innitrogen treatment. Add to Inquiry -
Inconel Globe Valve
Inconel Globe Valve are those devices that are used in industries for regulating, directing or controlling the flow of liquids or fluidized solids by closing and opening passageways. Add to Inquiry -
Duplex Globe Valve
Duplex globe valve is an excellent valve to use for shut-off service and shall be installed in the proper direction as flow arrow marked in the body. Unless other specific, globe valve shall be used Add to Inquiry -
Cast Steel Globe Valve
Cast Steel Globe Valve also called cut-off valve, is one of the most widely used valves. Due to the low friction between the sealing surfaces during the opening and closing process, it is relatively Add to Inquiry -
Bonney Forge Globe Valve
Bonney Forged steel globe valves are available in three bonnet designs. The first design is the Bolted Bonnet, with male-female joint, spiral wound gasket, made in F304/graphite. Ring joint gasket Add to Inquiry -
Y Pattern Globe Valve
Y Pattern globe valve with its stem and passageway forming a certain angle, and its seat sealing face and inlet and outlet passageways forming a certain angle. It is divided into left and right parts Add to Inquiry -
Cryogenic Application Globe Valve
The globe valve is built to handle low temperatures and cryogenic conditions. It is made from robust materials, such as stainless steel, carbon steel, cast steel, and more. It is equipped with an Add to Inquiry -
Ductile Iron Globe Valve
Ductile Iron Globe Valve is is a forced sealing valve, so when the valve is closed, pressure must be applied to the disc to force the sealing surface to not leak. It has a regenerable valve seat and Add to Inquiry -
Din Globe Valve
DIN globe valve is recommended for service in commercial and industrial applications, including hot and cold water, HVAC, steam, compressed air, gas and other general utility services. Globe valves Add to Inquiry -
Angle Globe Valve
Angle type Globe Valves are designed and manufactured according to Standards BS1873, ASME B16.34 or DIN3202, and special customers’ requirements.designed with a 90 degree between inlet and outlet to Add to Inquiry
Description The Angle Seat Valve is a 2/2-way pneumatically actuated piston valve for liquids, gases, steam and some aggressive fluids (vacuum services also.) The superior design of the piston is...
Sanitary Angle Seat Valve is applied in the industries of dairy, brewery, beverage, chemical, and pharmacy. It is operated by a single pneumatic actuator, select from either normally closed (NC) or...
Angle seat valves are 2-way, 2-position pneumatic piston valves. The piston pneumatic actuator provides linear motion to lift the seal from its seat. Because the seat is positioned at an angle,...
Pneumatic angle seat valve adopts single acting pneumatic actuator with spring safety protection to operate, 1-1/4 inch (DN32) thread port, 2 way 2 position. This angle seat piston valve can...
The Pneumatic Angle Valve is a valve where the seat of the valve is at a specific angle. The spindle keeps moving in the linear motion operating by the piston. It keeps moving towards the seal or far...
Valve Starting Position Normally Closed Normally Open Piston Material Stainless Steel Plastic Brass Air Connection Pipe Size 1/8 1/4 Maximum Temperature 355° F 365° F 425° F Pilot...










